Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer

The Impressive Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer   Deep penetrating high solid content single pack water based floor lacquer from Bona It can be applied over all types of water based and solvent based floor primers | sealers It looks spectacular, it dries in no time, it releases no fumes and is 100% non yellowing Its estimated coverage area is up to 12 sq meters per 1L when applied over a primer Used right and with the right ventilation, it should be ready for recoating within 2 hours Sold in a 5 L bottle | Available in extra matt finish, matt finish and an elegant silk matt Highly recommended as the main sealer for all types of high traffic intense footfall floors Superior anti-scratch resistance | Extraordinary high heel penetration resistance | Clear To be applied with a quality varnishing roller, or a quality applicator or a varnishing brush A self leveling product that can be used by highly skilled professionals and DIY users To be applied in a 3 coats system | 1 coat of primer and 2 coats of lacquer is the ideal It can be recoated and refreshed with any waterborne or water based wood floor polish   Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer | Why Use It   If you are one of those people who really cares about what product they use on their floors, how was it made and what kind of impact the product has on the planet, then you are one of those people likely to buy the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer. Also, if you are one of those people that is looking for a natural looking sealer that will provide years of protection, then you are very likely to use the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer.  Also, if you are a professional floor sanding contractor or floor sanding specialist that is looking for a new product to impress your customers & increase your profits, then you will love the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer. A quick drying, non yellowing, very high traffic floor lacquer, easy to apply, high coverage & very long lasting floor lacquer will appeal to so many people.   Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer | How To Use It   There are two ways of using the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer. You can use it to seal and protect new or newly sanded hardwood floors or you can use it to re-coat wooden floors that were sealed with a water based or a solvent based food lacquer that over time has become dull and tired looking.   New Or Newly Sanded Wood Floors | All pre-existing sealers have to be removed in full. Start with grit 40 and move up the grits up to 100 grit. Do not sand against the fiber of the wood as much as you can. Right before the lacquering, the surface has to be smooth enough to prevent all the lacquer being absorbed by the wood and deposited at the bottom of the floor but not that smooth so the lacquer cannot penetrate at all. Finishing the floor with 220 grit (example) will over finish the wood and the floor lacquer will not be able to penetrate the wood at all. Pre-Existing Finishes | If you are planning to recoat an older floor that still looks good but a bit dull and patchy, then start with a deep cleaning job and a deep degreasing to remove any residue like oils, grease, fat, impregnated dirt, food, etc. All that dirt would be a barrier between the new coat of lacquer and the old finish. Then give the surface a light sanding with 120-180 grit sandpaper just to create a bit of roughness on the floor. That roughness will enable the new coat of lacquer to bond better with the old sealer   Prepare a varnishing roller, a varnishing brush, a varnishing roller frame and an extension pole or a wooden handle. You will also need a varnishing bucket or tray. Pour some floor lacquer inside the bucket | tray and proceed to lacquering.   Use the varnishing brush to apply the product around the edges and all hard ro reach areas. Use the varnishing roller to roll the lacquer on the open spaces. Roll it up and down the fiber of the wood until the whole surface looks wet but not soaked. Allow it to dry for about 2 hours. Assuming that the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer was applied over a primed surface or pre-existing base surface. Now you have two options: you can re-sand the whole surface one more time with 220 grit sanding paper or you can apply the final coat without sanding between the coats. The re-sanding has to happen after the first coat of primer or lacquer. The second re-sanding after the second coat is optional but it can help to achieve a “glass” smooth finish.   Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer | Recommendations   The new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer is not compatible with oil based wood stains. Do not apply it as an overcoat over oiled floors. Do not mix up the product with any other floor lacquers. Respect the drying periods. Only apply the lacquer over a clean and dry surface. Do not use the product when the outside temperature is over 25 C. Store the product in a cool and dry place.   Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer